Govoni Handling System - Deutsch
Govoni Handling System - English
Govoni Handling System - Italiano
Products
Website
Steel or APRON belt conveyors
DESCRIPTION AND ADVANTAGES
With APRON technology, the plates are shaped so as to allow rotation in correspondence with the heads without requiring the presence of a connecting pivot. The absence of interstitial spaces prevents material from falling between the plates and guarantees resistance and efficiency even under the most severe operating conditions or high load capacity.
This geometry also allows for a drastic reduction in defects resulting from wear and tear of the plates and a reduction in replacement and maintenance operations which are necessary and frequent with other types of traditional conveyors.
The APRON slat conveyors manufactured by Govoni with a steel sheet belt allows for the handling of a wide range of materials including heavy or abrasive ones:

  • metal scraps
  • metal swarfs
  • hot materials from forging processes or from the foundry
  • recyclable materials like paper, cardboard, plastic, aluminium
  • solid biomass
  • waste and scrap
  • sludge and wastewater
  • chemical and pharmaceutical products
  • packaged and wrapped products
  • tiles, bricks and cement products

Various types of APRON conveyors can be manufactured with different dimensions depending on the morphology, specific weight and hourly flow rate of the swarf. They can be made of a single horizontal or inclined section or of a combination of these sections. They can also be conveniently used for the creation of a network of evacuators of considerable length sometimes in combination with drag or scraper conveyors, traditional auger conveyors and rubber belt conveyors, for transporting scrap, bulk material or waste to be disposed to the area of collection or in combination with the innovative Govoni screw conveyor for the transport of swarf and scrap or hot materials from forging processes or from the foundry.

Govoni has provided the best leaders in the automotive sector with conveying systems, fully automated crushing and storage of remelted aluminium where the production cycle starts from the processing of raw material and ends with the remelting of waste materials (metallic chips and scrap) in special internal furnaces before being returned to production.
The overlapped slat conveyors find application in many other areas that require the installation of handling systems for bulk and packaged materials, waste, sludge, pallets, aggregates and scrap.

All these systems have appropriate safety guards that comply with standards, so that no moving parts of the conveyor are in contact with the operator.
The APRON conveyors can also be equipped with:


  • side flaps, to protect the chain and the sliding rollers, shaped so as to allow free rotation of the plates in correspondence with the heads
  • belt alignment skirt guides, which help to make them stable in their path especially across long distances
  • Transverse cleats, to stabilize transport especially on inclined planes
  • frame with side walls, suitably shaped to prevent spillage of the material transported by the conveyor
  • equipment lubricant spray, to reduce friction of the driving chains to facilitate their operation and conservation.
The TM50 evacuators with 50-step chain have the same applications as that of T100, however they are usually used to carry less burdensome or difficult loads. In particular they find wide application in the extraction of swarf from machine tools.
Thanks to the conformation of the APRON plates, even when using the TM50 model, the small sized swarf is not likely to wedge between the plates, thanks to the absence of interstitial spaces. These conveyors can also be equipped with a tank for the recovery of the coolant for very compact evacuation systems in the machine.
SPECIFICATIONS

A1-A2BC1-C2DE


In the figure, Apron slat conveyors TM50 "A1" and "A2" and the drag conveyor "B" extracts the swarf from the machine tool to unload it on the main T100 slat conveyor "C1" , which in turn discharges the swarf into the T100 slat conveyor "C2" which also receives the swarf from the auger conveyor "D" to unload it in the central collection bin "E".

INFORMATION REQUEST
Photo Gallery
APRON T100S with heavy frame and single curve.
APRON T100S with heavy frame and single curve.
APRON T100S with lightweight frame installed in a paper handling system.
APRON T100S with lightweight frame installed in a paper handling system.
APRON T100S including one horizontal and one with a single curve.
APRON T100S including one horizontal and one with a single curve.
T100S Conveyor with heavy frame, side guards and protection on rump.
T100S Conveyor with heavy frame, side guards and protection on rump.
T100SS conveyor with double curve and closed frame.
T100SS conveyor with double curve and closed frame.
Upward slope ramp of a TM50S conveyor.
Upward slope ramp of a TM50S conveyor.
TM50SS conveyor with fluid recovery tank with pump.
TM50SS conveyor with fluid recovery tank with pump.
Conveyor with discharge chute protection in accordance with existing safety regulations.
Conveyor with discharge chute protection in accordance with existing safety regulations.
TM50S Conveyor with one curve and TM50SS special with double curve.
TM50S Conveyor with one curve and TM50SS special with double curve.
2017 Govoni Handling Systems S.r.l. - Registered office: Via Bologna 21, 44042 Cento (FE)
Share Capital: 97,500.00 fully paid up - VAT code: 01298160381 - Company Register of FE and Tax Code: 01298160381