Govoni Handling System - Deutsch
Govoni Handling System - English
Govoni Handling System - Italiano
Products
Website
Rubber belt conveyors
The RUBBER BELT CONVEYOR consists of a surface operated by two cylinders one of which is motorized (driving drum) and the other is an idler (neutral drum) mounted on steel shafts rotating on radial ball bearings. The belt can be made of closed loop rubber or PVC that slides either on a plane of sheet metal or on flat or trough idle rollers.

In the conveyors on flat rollers, the belt maintains a flat shape with low sliding friction, allowing significant savings of power even with high flow rates and very long straight or curved spans, generally used for packaged materials including heavy ones.




In the conveyors on trough rollers, the belt assumes a concave shape that varies depending on the positioning of the rollers, increasing the useful capacity of the load and the containment of the material transported, mainly used for bulk materials.



Govoni builds rubber belt conveyors characterized by simple construction, high operating reliability, quiet operation and reduced maintenance of the components exposed to stress; to prevent the weight of the load from changing the correct tension, the belt is equipped with special tensioners. These conveyors all have appropriate safety guards that comply with standards, so that no moving parts of the conveyor are in contact with the operator.
These conveyors are used for the transport of materials of various types including bulk and packaged materials, ecological, electrical, agricultural, chemical, food, mining products etc. with a wide range of models and accessories.


Depending on the material transported, Govoni equips its conveyors with belts of various types:

Criobelt: conveyor belt with cut-resistant and abrasion-resistant rubber with high resistance to atmospheric agents, suitable for the transport of cold materials (-30 to + 90 C) that are abrasive, sharp, heavy, medium and large size.
Termobelt: conveyor belt with heat-resistant, abrasion-resistant and cut-resistant rubber cover, with good resistance to atmospheric agents, suitable for the transport of warm materials (110 to 130 C) that are abrasive, medium and large size.
Actibelt: conveyor belt with abrasion-resistant rubber cover, very resistant to highly corrosive substances, suitable for the transport of cold materials (from 15 to 90 C) that are chemically active such as solvents, mineral grease, plant or animal oils and fats.
Spinabelt: chevron conveyor belt with abrasion-resistant and cut-resistant rubber cover, with a V-cleated surface suitable for transport on steep slopes (30/40) of cold bulk material (-30 to +90 C), abrasive substances, medium and large size, even very heavy materials.
Boxbelt: belt conveyor with abrasion-resistant rubber made in a variety of textures for transporting materials in packages (boxes, crates, packs, bags, etc.) on inclined sections.




PVC BELT CONVEYORS are used for the transport of packaged and bulk products, if a less bulky structure is needed and there is a lighter flow with respect to the rubber conveyor belt. The PVC tape slides on a plane of sheet metal without the use of support rollers and, depending on the material transported, can be smooth or have various patterned surface.
SPONDAFLEX BELTS are made of rubber or PVC with horizontal cleats and wavy side walls to allow considerable hourly capacity even at significant inclinations, keeping the overall dimensions of structure limited. These systems are suitable for the transport of solid, granular and powder materials which are prevented from exiting the conveyor.
DOWNLOAD RUBBER CONVEYOR BELT MODELS
ACCESSORIES

  • side guards made with or without a skirt for better containment of the materials being transported.
  • speed control
  • belt alignment tools
  • emergency stop push-button
  • dual sliding direction
  • unloading hopper
  • discharge chute
  • fixed or mobile support structures on wheels
  • driving cleats to facilitate transport on an incline
  • belt cleaner with rubber devices for the cleaning of the inner surface of the belt
  • drum cleaner with a scraping device on the idler drum surface
See also the page about handling systems for bulk and packaged materials, waste, sludge, pallets, aggregates and scrap.



INFORMATION REQUEST
Photo Gallery
Plane conveyor belt N model with folding side guards.
Plane conveyor belt N model with folding side guards.
Conveyor belt NBS model with ample useful width.
Conveyor belt NBS model with ample useful width.
Conveyor belt NBS model with spondaflex and cleats.
Conveyor belt NBS model with spondaflex and cleats.
Conveyor belt 3N model with one curve complete with safety guards.
Conveyor belt 3N model with one curve complete with safety guards.
Detail of loading area of conveyor belt model 3N.
Detail of loading area of conveyor belt model 3N.
Conveyor belt NBS model with cleats and front wheels.
Conveyor belt NBS model with cleats and front wheels.
2017 Govoni Handling Systems S.r.l. - Registered office: Via Bologna 21, 44042 Cento (FE)
Share Capital: 97,500.00 fully paid up - VAT code: 01298160381 - Company Register of FE and Tax Code: 01298160381